軟管泵的使用注意事項：
1、使用軟管泵時調壓板請不要擰得太緊，以免“扎死”泵頭，一般調到有液體流出即可，以延長其使用壽命。  
2、泵頭在快速運轉中，切勿按動“順/逆”開關，若要按動，則先將速度調慢后再按動，然后再將速度調至原來速度，即將電壓表讀數調至原來值。  
3、軟管泵在使用期間，應隨時注意軟管是否完好，一般在中速情況下運轉為佳，當發現軟管使用老化時，應及時更換軟管。  
4、使用完畢要將泵頭清洗干凈，若長時間不使用，應取下軟管，以延長其使用壽命。  
5、軟管泵長期不用時，請把軟管從泵頭中取出，延長其使用壽命。軟管是易損物品，使用一段時間后請及時更換。不然會造成漏液，損壞儀器！  
6、根據不同介質和不同流量，請選用不同粗細的軟管。

單管軟管泵應用范圍：
石油工業中的鉆井泥漿、原油輸送及汽油、煤油等有機溶劑和燃料油的輸送；水處理的淤泥漿，石灰漿輸送；采礦、冶金行業，如金礦開采中的填充物料，黃金冶煉中礦漿輸送；醫藥行業中藥品料液的輸送；食品行業中的油類物料及飲料輸送；造紙行業的紙漿，硫磺漿輸送；建筑行業的水泥砂漿輸送；陶瓷行業的陶瓷釉漿輸送；核廢料、電解廢渣、金屬渣液、油漆、涂料等等液體物料的輸送。

Application range of single tube hose pump:
Drilling mud, crude oil transportation and transportation of organic solvents and fuel oils such as gasoline and kerosene in the petroleum industry; transportation of sludge and lime slurry for water treatment; mining and metallurgical industries, such as filling materials in gold mining, and pulp in gold smelting Transportation; transportation of pharmaceutical materials and liquids in the pharmaceutical industry; transportation of oil materials and beverages in the food industry; transportation of pulp and sulfur pulp in the paper industry; transportation of cement mortar in the construction industry; transportation of ceramic glaze in the ceramic industry; nuclear waste and electrolysis Transportation of liquid materials such as waste slag, metal slag liquid, paint, coating and so on.