電機+定整比減速器 <br />
  主要特點：承載能力強，效率高，振動小，噪音低，能耗低，傳動方式簡單，但由于其速比恒定，所以決定了流量不可調。<br />
   變頻電機+變頻器
  主要特點：扭矩大，調速精度高，運轉平穩，性能穩定，可實現轉速的自動調節，確保了流量的任意控制，彌補了無級變速器自動化程度不高的缺陷。缺點是變頻器的價格較高。<br />
    液壓馬達式。                 

軟管泵工作原理：
一根內壁光滑，強度可靠的特制橡膠軟管安裝在泵體內部，通過一對壓輥沿著軟管旋轉擠壓，這樣的 旋轉使得介質往一個方向輸送而不會倒流，軟管在輸送介質之后，由被壓扁軟管的自身彈性和側導輪的強制下，軟管恢復原狀，此時，軟管內產生高真空將介質再次吸入管腔，然后介質在隨之而來的壓輥擠壓下從軟管內排出，如此周而復始，介質不斷的被吸入和排出。目前產品使用溫度為≤100℃。根據用戶需要可以開發使用溫度在120℃的軟管泵軟管產品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

軟管泵的軟管設計：工業軟管泵的軟管經過特殊設計優質材料，能反復壓縮，不應與“普通軟管”混淆。有些軟管是由均勻的擠壓材料制成的，而另一些軟管有一層增強纖維內層，以增加軟管的剛度，并確保軟管在未壓縮時具有圓形截面。當擠壓管的擠壓回彈達到不合格范圍時，需要及時更換擠壓泵軟管，即使不壓縮也會使軟管保持橢圓。對于內襯軟管設計，這種“軟管疲勞”終可能導致內部開裂或分層。 在軟管完全失效之前更換，以防止工藝流體泄漏到泵中，并可能流出泵。