工業軟管泵輸油不足的可能原因及解決方法齒輪泵故障排除10個隔油環齒輪泵應能連續供油，齒輪嚙合重疊系數應大于1。當一對齒輪未脫離嚙合時，另一對齒輪已進入嚙合狀態。這樣，當有兩對齒輪同時嚙合時，兩對齒輪的齒嚙合線之間形成一個封閉的體積，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 

首先我們先介紹一下軟管泵，軟管泵又稱蠕動泵。為了泵體污染流體或流體污染泵體的危險性，整個泵的裝置中只有軟管與介質接觸。在一般場合下，軟管泵使用的都是天然橡膠的軟管。內層和外層都是完整光滑的天然橡膠，其目的是很強防磨損。適用于腐蝕性不高但磨損性很大的如泥漿以及無機物等等介質。而且一般適用于脂肪、油類或油脂的介質，以及有機化學物質。內層是橡膠，而外層是天然橡膠或者是復合橡膠。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

 

軟管泵采用外裝動、靜環式機械密封，可直接水沖洗，耐高壓，不易磨損，無泄漏。 體積小，流量大，揚程壓力高，適用長距離與高阻力定量輸送。 <br />
泵的葉輪與傳動齒輪分開，且在泵腔內各零配件之間保證一定的間隙，相互不接觸，無磨損，低噪音，可靠性好，使用壽命長，節能降耗。<br />
配置變頻器后，可以隨意調節流量，并可做一般計量泵使用。