電工鋼硅鋼片Electrical steel, also known as silicon steel sheet, is an indispensable metal material in the power, electronics, and military industries, and is also the largest functional material in production. It is mainly used as the iron core for various motors, generators, and transformers. Since it is a functional material, its performance testing also revolves around "function". These indicators are often mentioned in trade and processing processes, and a brief understanding can help everyone better carry out their work. The performance testing of electrical steel mainly includes the following aspects: magnetic inspection, stacking coefficient inspection, coating adhesion inspection, repeated bending inspection, size and shape surface inspection, and conventional mechanical property inspection. In addition to the types of products listed above, there are also some special purpose electrical steel plates, such as 0.15 and 0.20mm thick 3％ Si cold-rolled non oriented silicon steel strips and 0.025, 0.05, and 0.1mm thick 3％ Si cold-rolled oriented silicon steel strips, which are used as intermediate and intermediate grade High frequency motors and transformers, as well as pulse transformers, etc； 0.7mm thick 3％ Si high-strength cold-rolled non oriented silicon steel plate for relays and power switches； High strength cold-rolled electrical steel plate for new high-speed motor rotors； Low carbon electrical steel hot-rolled thick and cold-rolled plates for magnetic shielding and high-energy accelerator electromagnets such as medical magnetic resonance tomography scanners； 4.5％ to 6.5％ Si high silicon steel plates for high-frequency motors, transformers, and magnetic shielding. Generally, motors, transformers, and other electrical components are required to have high efficiency, low power consumption, small size, and light weight. Electrical steel plates are usually guaranteed to have magnetic properties based on core loss and magnetic induction strength. Magnetic induction strength is the number of magnetic lines passing through a unit cross-sectional area of the iron core, also known as magnetic flux density. It represents the material‘s magnetization ability, measured in T. The magnetic induction strength of electrical steel plates is high, and the excitation current (also known as no-load current) of the iron core is reduced. Copper and iron losses are also reduced, which can save electrical energy. When the power of the motor and transformer remains constant, the magnetic induction intensity is high, and the design Bm can be increased. The cross-sectional area of the iron core can be reduced, which reduces the volume and weight of the iron core, and saves the amount of electrical steel plates, wires, insulation materials, and structural materials used. This can reduce the total loss and manufacturing cost of the motor and transformer, and is beneficial for the manufacturing, installation, and transportation of large transformers and motors. The main requirements for the performance of silicon steel are: 1. Low iron loss is the most important indicator of the quality of silicon steel sheets. Various countries classify grades based on iron loss values, with the lower the iron loss, the higher the grade. 2. Under strong magnetic fields, the magnetic induction intensity (magnetic induction) is high, which reduces the volume and weight of the iron core of the motor and transformer, saving silicon steel sheets, copper wires, and insulation materials. 3. The surface is smooth, flat, and the thickness is uniform, which can improve the filling coefficient of the iron core. 4. Good lamination performance is more important for manufacturing micro and small electric motors. 5. The adhesion and weldability of the surface insulation film are good, which can prevent corrosion and improve the punching performan

電工鋼硅鋼片：電工鋼鋼板經沖片、廣西柳州本地剪切、廣西柳州本地彎曲會引入殘余應力，導致磁性能劣化。應力退火（SRA）可以殘余應力對磁疇移動與轉動的阻礙作用，恢復電磁性能。E.2 在鋼板或疊鐵心的狀態下進行應力退火的注意事項如下。1). 避免氧化和滲碳為了防止氧化應力退火應該在保護氣氛下進行，通常是 10％以下氫氣（H2）和 90％以上氮氣（N2）、廣西柳州本地100％氮氣（N2）或者氨分解氣氛的非爆炸性保護氣氛，露點控制在 0℃以下。沖壓加工過程引入的沖壓油在退火前應完全去除，防止在退火中發生滲碳，劣化產品磁性。2). 退火溫度及保持時間退火溫度指材料溫度，750℃為宜。為使得鋼板各部分退火均勻，需要調整溫度與保持時間。溫度太低不足以殘余應力的影響，溫度太高會破壞涂層絕緣性。3). 冷卻時間應當避免急劇冷卻使材料產生應力應變。冷卻時間根據電工鋼退火數量進行調整。對于退火小噸位數量時，可按每小時不超過 25℃ 的冷卻速度冷卻到 350℃,以避免冷卻過程中產生應力應變。對于退火大噸位數量時，應采取更加緩慢的冷卻速率，以期獲得 效果。