工藝介紹：用傳統的物化法或生物法來處理垃圾滲濾液，不僅效果較差、難以達標，還會存在占地面積大，建成時間長等問題；如果采用包括納濾、反滲透等在內的MBR（即膜+生化結合）工藝進行處理，則會存在投資高、工藝復雜、運行費用高、處理后的濃縮液造成二次污染等各類問題。                                  

工業軟管泵不銹鋼齒輪泵，可輸送非潤滑油飲料低腐蝕性液體，配銅齒輪可輸送汽油苯等低內點液體。由于齒輪泵自吸能力差，一般是由于齒輪泵泵腔間隙較大所致。同時也是如果齒輪泵輸出端沒有“止回閥”，則必須是下一級齒輪泵的止回閥或控制閥。移動固定后，周圍工作人員可恢復手術。

Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.

單管軟管泵特點:
動力消耗少，可計量輸出；易損件少，更換時間短；獨特?zé)o密封結構，不會產生泄露；自吸能力強，可達8米；可正反向運轉，具有自清理能力；壓軸采用滾動摩擦，泵腔無需加油；結構簡單，操作維修方便；出口壓力 可達1.6Mpa；輸送高粘度、高固含量、固體顆粒、纖維物質、及其他雜志等液物料，不會產生任何堵塞。

Single tube hose pump features:
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .