軟管泵工作原理：
一根內壁光滑，強度可靠的特制橡膠軟管安裝在泵體內部，通過一對壓輥沿著軟管旋轉擠壓，這樣的 旋轉使得介質往一個方向輸送而不會倒流，軟管在輸送介質之后，由被壓扁軟管的自身彈性和側導輪的強制下，軟管恢復原狀，此時，軟管內產生高真空將介質再次吸入管腔，然后介質在隨之而來的壓輥擠壓下從軟管內排出，如此周而復始，介質不斷的被吸入和排出。目前產品使用溫度為≤100℃。根據用戶需要可以開發使用溫度在120℃的軟管泵軟管產品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

軟管泵的使用與維護<br />
軟管泵的正常工作對整套鉆探設備的生產效率起著很大的作用。正確維護和使用軟管泵能提高鉆進速度和純鉆進時間，保護孔內清潔，并能將井壁坍和卡鉆事故減至小。因此我們應當做好泵的使用，維護和保養工作。為保護軟管泵的壽命及其正常工作，必須從包裝運輸保存開始，直至安裝使用和維護保養都精心注意。<br />
1、軟管泵在開啟前的維護與保養，在軟管泵開動前應對軟管泵系統作檢查；對液力端的整個循環系統作仔細檢查；<br />
2、軟管泵在運轉過程中的使用與維護，檢查各運動件的潤滑情況；要密切注意泥漿質量；注意壓力表，閥工作是否正常；曲軸箱內的油溫及缸套活塞副的溫度不得過高。<br />！